Description
The Schluter KERDI LINE H Linear Drain is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. It consists of a deep-drawn stainless steel channel body as well as a grate and frame top section that can be seamlessly adjusted to the thickness of the covering with the help of the installation aid included in the set.
The Schluter KERDI LINE H Linear Drain features a horizontal drain with an integrated odour trap, that can be positioned at intermediate or perimeter locations in the floor. Available with a DN40 (40mm) or DN50 (50mm) diameter outlet pipe. The DN40 Version has an installation height of 78mm, and the DN50 Version has an installation height of 97mm.
The Schluter KERDI LINE H Linear Drain is available in lengths from 500mm to 1800mm, in 100mm increments. This length value refers to the internal size of the channel trap – the external length of the body is 50mm more for each size, due to the 25mm flange that runs round the entire top edge of the channel body. This flange comes pre-adhered with a sealing collar made of Schluter KERDI 200 Membrane. It ensures the reliable connection of the channel body to the bonded waterproofing assembly, both in the floor area and on upright walls. It can be universally used for intermediate installation in floor or at wall areas.
The Schluter KERDI LINE H Linear Drain is designed to be combined with the KERDI LINE Standard, KERDI LINE STYLE Contour Grate/Frame Sets and the KERDI LINE D frameless tile cover support, which are purchased separately.
When the Schluter KERDI LINE H Linear Drain is used in conjunction with the waterproofing systems Schluter KERDI 200 Membrane, Schluter DITRA 25 Matting, Schluter DITRA HEAT Matting or Schluter KERDI BOARD and the associated system sealing adhesives Schluter KERDI COLL L or Schluter KERDI FIX, this results in certified bonded waterproofing assemblies with a connected linear drainage.
The Schluter KERDI LINE H Linear Drain can also be used with the Schluter pre-formed sloped linear shower trays – Schluter KERDI SHOWER LT/LTS Shower Trays.
The Schluter KERDI LINE H Linear Drain channel bodies with lengths up to 1200 mm are made of formed stainless steel V4A (material no. 1.44404 = AISI 316L). For lengths of 1300 mm to 1800mm, they are made of angled and welded stainless steel V4A (material no. 1.44404 = AISI 316L). The channel bodies feature an adhesive flange with a factory-attached Schluter KERDI collar on the surface. This is a soft polyethylene waterproofing membrane with fleece fabric laminated on both sides. Depending on the type, drain bodies are made of high-impact polypropylene (PP) or acrylonitrile butadiene styrene (ABS). The odour trap is made of fibre-reinforced polypropylene (PP).