Description
Rasante Base (2 m2) 3KG
Application of the product
In the event that a FIBREGLASS MESH (75 or 160) is used:
• Position the mesh onto the laying surface without any overlaps.
• Apply the first abundant coat of the product, on the floor or wall, over the mesh using a smooth steel trowel, covering the mesh spacings well.
• After 6 hours (at +23°C) apply the second and last coat.
Field of application
Solid, cohesive and dust-free concrete screeds and floors (if necessary, pre-treat them with diluted PRIMER SW).
• Wood, plasterboard, polymer-cement and silicate panels.
• Coated metal.
• Suitably cleaned old tiles.
• Stone coverings.
• Walls that have already been painted following diamond-wheel grinding.
Specific preparation of the laying support
• In case of rising damp exceeding 5% (as per the ASTM D4944 standard - carbide method), prepare the support by priming it with BARRIERA AL VAPORE 4.0.
Consumption
| Type of application | minimum consumption |
maximum consumption |
|
| 1,4 | 1,6 | kg/m² | |
| 0,4 | 0,6 | kg/m² | |
| 1,2 | 1,6 | kg/m² | |
| 1,8 | 2,0 | kg/m² | |
| 2,2 | 2,6 | kg/m² |
► APPLICATION DATA AND FINAL PERFORMANCES
| Pull-off test resistance from glazed ceramic, after 7 days + 23 ° C / 50% RH, ASTM D4541 | > 2 | |
| Application temperature | ||
| Surface drying time (+23°C, 50% R.H.), on concrete surfaces, EN ISO 9117-3 | hours | 6 ± 1 |
| Waiting time between the first and second coat, at +1°C | hours | 7 |
| Waiting time between the first and second coat, at +23°C | hours | 3 |
| Walk-over time (at +23°C, 50% R.H.) | hours | 3 |
| Full curing time (at +23°C, 50% R.H.) | days | 3 |
Packages
| fustino - 3 kg | 120 fustini |
Product storage
• Protect the product against frost.
Cleaning of tools
• Hardened product: remove mechanically, use special paint strippers (GEL STRIPPER or FLUID STRIPPER) or a thermal gun.