Hybrid Polymer Power Fix white

Request for best price
per pack )
Request for best price
per pack )


blaugelb Hybrid Polymer Power Fix 600ml white 20 bags


The blaugelb Hybrid Polymer Power Fix 600 ml white is a single-component permanently elastic sealant that is suitable for sealing expansion and connecting joints.

Formulated on the basis of a hybrid polymer, it exhibits particularly high initial adhesion and rapid full cure. The blaugelb Hybrid Polymer Power Fix 600 ml white is waterproof, weather and UV-resistant and also resistant to many chemicals. Thanks to its outstanding initial adhesion, it can usually be applied without primer to almost all – even wet – substrates encountered in construction. Because the blaugelb Hybrid Polymer Power Fix 600 ml white exhibits not only excellent sealing properties but is also particularly suitable for fastening components, the product is part of the pre-wall installation system blaugelb Triotherm+, where it is used as a sealant and adhesive for fitting the blaugelb Triotherm+ profiles, in conjunction with the triangular nozzle.

Applications: blaugelb Triotherm+ pre-wall installation system, sealing of connecting joints on windows and roller shutter cases, fastening and sealing in the metal and construction industry, for door frames, window sills, plates, panels, strips, wood constructions and insulating materials.

Substrates: Metals (steel, aluminium, brass, zinc etc.), plastics (poly-carbonate, PVC, ABS, polyamide, PMMA and GRP), cork, stone, enamel, glass, wood, HPL. Very well suited for concrete and cement-bonded fibreboard, sand-lime brick, hollow brick and porous concrete. The substrate should always be well cleaned for each application and not show any traces of release oil etc. Incompatibility (e.g. discolourations) may occur with natural stone. Do not use on PE, PP, PTFE or silicones.

Product benefits:

  • Outstanding initial adhesion on various substrates
  • Rapid full cure
  • High-performance sealing
  • Weather and UV-resistant, non-fading
  • System component of the tested pre-wall installation system
  • blaugelb Triotherm+
  • Exceptional final adhesion (320 kg/10 cm2)
  • Universally usable for sealing and fastening
  • Very good processability, moisture and temperature-resistant
  • Permanently elastic, compensates for unevenness and material movements
  • Silicone, isocyanate, solvent, halogen and acid-free
  • Non-corrosive
  • Virtually odourless
  • Exceptionally suited for time-critical application due to its fast
  • processability
  • Cured by atmospheric humidity from outside inwards
  • Very good coatability according to DIN 52452-A1*, can be painted over wet-in-wet
  • Suitable for all standard construction surfaces*
  • Building material class B2 (DIN 4102)
  • Tested to be low in pollutants according to EMICODE EC1 Plus


Technical Data Sheet



Material base:

1C hybrid polymer



Curing system:

polymerisation by atmospheric humidity

Building material class:


Curing speed:

At 23°C and 50% RH

approx. 3mm/ 24hrs.

Skin formation:

at 23°C and 50% RH

approx. 5 minutes




Shore A hardness:


60 +/- 5

Max. permissible deformation:

20 %

Change in volume:


-3 to -4 vol.%

Tensile strength:



Tensile shear strength:


1.4 N/mm²

Modulus of elasticity 100%:


2.3 N/mm²

Elongation at break:


400 %

Elastic recovery:



Solvent content:


Isocyanate content:


Processing temperature:

Ambient: 0°C to +40°C

substrate: 0°C to +35°C

Temperature resistance:

from -40°C to +90°C

Moisture resistance:


Ecological report:



very good coatability
according to DIN52452-A1,
can be painted over wet-in-wet

Storage life:

12 months in unopened pack
at +5°C to +25°C

Delivery form:

600ml tubular bag


You may also like

Recently viewed