Description
EVERBUILD FILL ONCE® White 325ml
A revolutionary new ready mixed filler
EVERBUILD FILL ONCE® is a revolutionary new ready mixed filler made with Expanded Micro-Sphere Technology (EMT) making it ideal for filling large or small holes in ONE application without the need for building up of layers. Formulated to outperform conventional fillers EVERBUILD FILL ONCE® provides a smooth, fine finish that won’t shrink back after setting and will only require minimal or no sanding. EVERBUILD FILL ONCE® will set hard so it can support nails or screws directly into solid substrates. It is ideal for repairs to plaster, wood, brick, stone and rendering.
Usage
Fills gaps and holes in:
- Plaster
- Brick
- Stone
- Wood
- Render
Advantages
- Fills in one go- No need to build up layers of filler - fills up to 50mm deep in one application.
- Can be nailed or screwed once fully dried.
- Easy to use - lightweight paste is incredibly easy to apply.
- No sanding required - finishes to a smooth surface.
- No sagging - the lightweight properties prevent sagging even on ceilings.
- Non-shrink - will not shrink back whilst drying.
- Quick drying - ready to paint/paper in just 30 minutes.
- Overpaintable with most solvent based and emulsion paints.
- Overstainable.
- Internal/external use.
- Dries brilliant white.
Movement Accom Low Maximum Fill 50mm in one coat – further layers may be built up pH 8.5 – 9.5
Packaging
325 ml
|
Shelf Life |
Storage Conditions |
Density |
| 12 months from date of manufacture when stored according to manufacturer’s instructions. |
Store in original container between 5-20°C. Ensure lid is tightly closed and the plastic disc is pressed firmly into the surface of the filler after use. |
0.39 – 0.43g/cm³ @ 20°C |
Application
|
Layer Thickness |
Ambient Air Temperature |
Drying time |
| Maximum 50mm |
5°C to 30°C |
30 minutes at 20°C 50% R.H. |
APPLICATION
Apply using a flexible filler knife, smoothing down to achieve a perfect surface that won’t need sanding.
When filling a large surface area, it may not always be possible to achieve a completely level finish. However, EVERBUILD FILL ONCE® can be sanded if necessary once dry. Deep holes up to 50mm can be filled in one application with no need to build up in several layers.
EVERBUILD FILL ONCE® can be papered over, or painted with water based paints as soon as the surface is dry – approximately 30 minutes – depending on depth and drying conditions. When using oil based paints, allow 12 hours to dry.