Description
EVERBUILD® FIX & FILL Expanding Foam Spray 750 ml
One-part, quick-setting polyurethane foam
EVERBUILD® FIX & FILL is a quick-setting one-part polyurethane foam in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application up to 150 % its original volume. Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 °C to +30 °C, ideally +20 °C.
Usage
Filling
- Gaps around pipe entries through walls.
- Gaps around window frames, door frames.
- Electrical wire chasing prior to plastering.
- Deep joints prior to applying sealant or plaster.
- Irregular gaps in stone, brick, concrete or plaster.
Fixing
- Door frames.
- Timber structures.
- Window sills and thresholds.
- Window frames.
Insulating
- Behind cladding to exterior walls.
- Behind soffit and barge boards.
Advantages
- Quick setting - can be cut, sawn or plastered in 1 hour.
- Economical in use - expands up to 55 times its original volume.
- Fills irregular and broad gaps where most conventional fillers would fail.
- Possesses insulating and sound deadening properties.
Expansion 45 litres (750 ml can) 30 litres (500 ml can) Cell Structure Medium fine Temp Res Of Cured Bead Long Term: -40 to +80 °C Short Term: -40 to +100 °C Building Material ClassB3
Packaging
750 ml aerosol
Product Details
|
Shelf Life |
Storage Conditions |
| 15 months in original containers at stated storage temperatures. |
Store upright between +5 °C and +25 °C. Pressurised container. Protect from sunlight and do not expose to temperatures above 50 °C. Do not pierce or burn the can even after use. Store as flammable liquid. Note: Elevated temperatures will reduce shelf life dramatically. |
Technical Information
|
Compressive Strength |
Tensile Strength |
Reaction to Fire |
Thermal Resistance |
Resistance to Water Penetration |
Thermal Conductivity |
Water Absorption |
| 0.03 MPa (DIN 53427) |
0.08 MPa (ISO 1926-79) |
B3 (DIN 4102-1) |
-40 °C to +80 °C |
0 (ISO 2896-87) |
0.036 W/m.k (DIN 52612) |
0.3 Vol % (DIN 53433) |
Application
Cutting Time
30-45 minutes (10 mm diameter)
Tack Free Time
~7 minutes (10 mm diameter)
Consumption
Yield
30-45 L (750 ml can) 20-30 L (500 ml can)
SUBSTRATE PREPARATION
Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.